1·The strip winding near the inner core of coil car has always been stripped while discharging coil since galvanizing mills put into operation in Angang Cold Rolled Sheet Plant.
鞍钢冷轧厂镀锌机组自投产以来，一直存在钢卷车在卸卷时发生内径抽芯卸卷失败等卸卷故障。
2·Main equipment design of strip slitting unit applied for big steel coil, heavy thickness and high strength, such as uncoiling machine, disc shear and recoiler were researched.
对大卷、厚壁、高强度钢带纵剪机组的主要设备如开卷机、圆盘剪、卷取机的设计进行了探讨。
3·Structure testing in low magnificution, chemical composition analysis and microstructure examination were used to analyze the edge cracking of strip steel coil.
采用低倍组织试验、化学成分分析及金相检验等方法，对出现边裂的带钢卷进行了解剖分析。
4·Coiler is one of the most important assistant equipment for steel rolling. It is used to coil strip into coiled steel.
卷取机是一种重要的轧钢辅助设备，其用途是把轧制后的成品带钢卷成钢卷。
5·The mechanism of producing the felting defect of cold rolled coil strip was analyzed.
分析了冷轧钢卷粘结产生的机理。
6·SCRAP REDUCTION :To use the whole width of the coil, reducing to the minimum the distances between disc to disc to the strip edges, with a consequment, reduction of the scrap quantity.
减少废料：充分利用卷料的宽度， 采用高精密伺服电机驱动系统控制， 使圆片间距和圆片到料边的距离减少到最小， 从而减小废料量。
7·The process research on reducing the coil break defect of continuous hot-rolled strip and production control were introduced.
介绍减少热连轧钢卷横折缺陷的工艺研究和生产控制情况。
8·Our company manufactures and sales all kinds of the nails, such as lined nails, Plastic strip nail, galvanize nails, popular coil nails, concrete nails, screw nails and so on.
缙云县欣宇金属制品有限公司是一家专业生产塑排钉、卷钉、紫铜钉、不锈钢钉、镀锌钉和无头钉等的出口私营企业。
9·The HR Coil, which is the basic raw material, is passed through CPL to remove the oxides or scales from strip surface to enable further reduction of thickness to desired level in Cold Rolling Mills.
HR 线圈， 是基本的原料，被道次过 CPL 把氧化物或者锈皮从分带表面移开使厚度的较进一步的还原反应能够在冷轧制造工厂需要水平。
10·The application results proved that the hot coil box technique can reduce the thickness tolerance of the ends of strips and improve the quality of products in hot strip rolling production.
实践证明：在带钢热连轧生产中采用热卷箱技术可以减小成品带钢的头尾厚度公差，提高产品质量。